Features
Complete bq2060 Gas Gauge circuit
Connects directly across the cells in a battery pack
Battery information through two-wire (SMBus)
communication port
Includes push-button activated LEDs to display
state-of-charge information
Compact size illustrates typical circuit
implementation
Pre-configured EEPROM
General Description
The DM2060 Gas Gauge Demonstration Module pro-
vides a typical implementation for the bq2060 SBS v 1.1
Compliant Gas Gauge IC. The DM2060 incorporates a
bq2060 IC, an EEPROM, a 30mΩ sense resistor, and all
other components necessary for gas gauge operation.
Each DM2060 module is pre-programmed for the pack
voltage, chemistry, and capacity, as outlined in Ordering
Information.
The DM2060 includes 4 LEDs to display remaining ca-
pacity in 25% increments of the learned full capacity.
The LEDs are activated with the onboard push-button
switch.
Contacts are provided on the DM2060 for direct connec
-
tion across the battery stack (B+, BAT-) and the individ
-
ual series cells in a Li-Ion pack (CELL1P, CELL2P,
CELL3P, and CELL4P). The SMBD (data) and SMBC
(clock) are the SMBus communication lines. Figure 1
shows how to connect a DM2060 to a battery pack.
Re-Programming
Using the evaluation software, the DM2060 circuit mod
-
ules can be re-programmed for pack voltage, chemistry,
capacity, and other critical operating parameters. The
bq2060 data sheet and the EV2200-60 User’s Guide il
-
lustrate typical EEPROM programming for Li-Ion and
NiMH battery packs.
Pin Descriptions
B+
Battery positive/Pack positive
BAT-
Battery negative
CELL1P–
CELL4P
Intermediate cell stack connections for
Li-Ion
SMBD
SMBus data line
SMBC
SMBus clock time
1
bq2060 SBS v1.1 Gas Gauge
Demonstration Module
DM2060
SLUU060 - APRIL 2000
Kommentare zu diesen Handbüchern