CEL ZFSM-201-EVB-1 Bedienungsanleitung PDF herunterladen (Seite 8)

FreeStar Pro BeeKit Porting Guide

Rev B Document No. 0006-00-08-03-000 Page 8 of 15

Figure 7 – Screen, BeeKit™ Launching Platform Editor

Figure 8 – Screen, BeeKit™ Loading Configuration

The screen in Figure 9 will appear.

10) If the target hardware is the

ZFSM-201-EVB-1

eval board, click the

‘Load Configuration From’

Button in the lower left hand corner of the window as shown in Figure 8.

11) Select the FreeStarPro.bkudp32 file in the directory \ZFSM-201\Application Source Files\CEL Beekit

Plugin v1.1\ on the CEL CD.

This file contains the hardware configuration for the ZFSM-201-EVB-1 FreeStar Pro Evaluation

Board.

If the hardware attached to the FreeStar Pro is different (or the user wants to understand the

Freescale Platform Editor) continue with the following steps.

12) In the LEDs and Switches tab shown in Figure 9 the only change made from the default by the

Configuration Load was to set the LED 4 GPIO Pin to 01. If not using the CEL FreeStar Pro Interface

Board, select these settings according to the hardware on which the module is being used.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

CEL ZFSM-201-EVB-1 Bedienungsanleitung Seite 8